ACG+
Service & Troubleshooting Manual
Int. Approved
Document ref: P0149-825-00
October 2022
Page 23 of 37
Copyright © 2022 Analox Ltd. All Rights Reserved.
Commercial in Confidence
3]
Using the stack removal tool (9300-1021) insert the ends of the tool into the slots on
the sides of the sensor as shown, keeping a finger on top of the stack so as it does not
spring away from the sensor and so that the spring and lamp cannot pop out upon
removal.
4]
Carefully remove the lamp from the sensor, making sure that the window of the lamp is
not touched.
5]
Using the lamp cleaning kit (9300-1022) and suitable protective clothing, open the
container of cleaning compound, with a clean cotton bud, apply a small amount to one
end.
