ACG+
Service & Troubleshooting Manual
Int. Approved
Document ref: P0149-825-00
October 2022
Page 25 of 37
Copyright © 2022 Analox Ltd. All Rights Reserved.
Commercial in Confidence
4.1.5
Water vapour sensor replacement
The part number for the replacement water vapour sensor is:
6000-0094
1]
Disconnect the cable from the end of the water vapour sensor.
2]
Using a 30mm spanner (part number 9300-1020), loosen the sensor from its housing
and unscrew the sensor fully from its mount. Take care when performing this step as
the sensor head is delicate.
3]
Unscrew the protective cap from the new sensor and place it over the sensing head of
the removed sensor.
Dowty
washer
