ACG+
Service & Troubleshooting Manual
Int. Approved
Document ref: P0149-825-00
October 2022
Page 7 of 37
Copyright © 2022 Analox Ltd. All Rights Reserved.
Commercial in Confidence
Body
Part
Effect
First Aid Procedures
Inhalation Persons with pre-existing impaired
respiratory function may be more
susceptible to the effects of the
substance.
Inhalation is not an expected hazard
unless heated to high temperatures.
Mist or vapour inhalation can cause
irritation to the nose, throat, and
upper respiratory tract.
Remove to fresh air.
Rest and keep warm.
Obtain medical advice if applicable.
Should leakage of any electrolyte occur as a result of misuse, incorrect operation, manufacturing error,
physical damage, etc. then wear protective gloves when cleaning any spills. Should electrolyte contact
skin then the affected area should be washed thoroughly with copious water and medical advice
sought if there has been any contact with the eyes or mouth. If connected to any electrical equipment,
the sensor should be immediately removed.
1.2
PID lamp cleaning kit
The PID lamp cleaning kit (9300-1022) contains a vial of cleaning compound which contains alumina
(CAS Number 1344-28-1) as a very fine powder.
Hazard identification: May cause irritation of respiratory tract and eyes
Storage: Keep container closed to prevent water absorption and contamination
Handling:
•
Do not breathe in the powder, avoid contact with skin, eyes and clothing
•
Wear suitable protective clothing
•
Follow industrial hygiene practices, wash face and hands thoroughly with soap and water after
use and before eating, drinking, smoking or applying cosmetics
•
The powder carries a TVL (TWA) limit of 10mg/m
3
