Analog way Aquilon C Page 58 User Manual Download

Page: 58 / 94

www.analogway.com

USER MANUAL

USER MANUAL

USER MANUAL

USER MANUAL

USER MANUAL

USER MANUAL

USER MANUAL

USER MANUAL

1 1

Images and Library

Image management is separated in two menus:

Library

: transfer images to the LivePremier unit.

Images

: assign uploaded image to image preset to be used in layers.

11.1

Library

Note

: LivePremier units can store up to 200 images.

Library

, all imported images are displayed in a Grid view.

The following information are displayed per image:
- Resolution
- Image recommended capacity
- Image number (in Library)
- Image file name

- Download to PC (in

)

- Delete from library (in

)

Image formats

LivePremier units support the following image formats:

- BMP
- GIF (not animated)
- JPG
- PNG
- SVG
- TIF

- PBM
- PGM
- PPM
- XBM
- XPM

Note: Animated images are not supported (ex: animated GIF)

Image specifications

- Maximum width: 16 384 pixels
- Maximum height: 8 192 pixels
- Maximum width x height: 8 847 360 pixels (= 4096x2160)
- Maximum file size: 35 MB

Note: Images cannot be resized or renamed in the Library. If needed, download the image, modify it and then re-upload it.

Summary of Contents for Aquilon C































































































Search results

Summary of Contents for Aquilon C

Reviews:

Related manuals for Aquilon C

Brands by name

Popular brands

Analog way Aquilon C, User Manual

Search results

Summary of Contents for Aquilon C

Reviews:

Related manuals for Aquilon C

Brands by name

Popular brands