23
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
Default network settings
Connect a computer to the LivePremier unit via LAN connection. Use a crossover cable if connecting directly
to the unit, or use straight cables if connecting through a switch or hub.
Tip
: All connections should be done before starting the LivePremier unit.
Default network settings:
IP Address: 192.168.2.140
Subnet Mask: 255.255.255.0
Port: 80
Note
: Make sure that ports 80, 10606 and 10691 are available on your network and/or not blocked by firewall.
To connect to this address, a computer needs to be configured to use a unique IP address on the same
network. If this setup is part of a larger network with other devices, please check with your network
administrator before plugging these devices into the network to avoid any IP address conflicts.
Example of static IP address on one computer:
Computer IP address: 192.168.2.50
Computer Subnet Mask: 255.255.255.0
Connection
To access the
WebRCS
, launch a web browser and enter the LivePremier IP address in the address bar. It is
possible to connect multiple computers to the same LivePremier unit for real-time collaboration.
Fig. 5 -
WebRCS connection
All devices default IP addresses are
192.168.2.140
.
Tip
: Computers using energy saving mode may turn off the network adaptor during periods of inactivity. Disable the energy
saving mode to ensure the connection remains active.
5.2
General tips
Web browser features
The WebRCS is fully browser integrated and behaves like any web site.
It manages browser features such as:
-
Previous page / Next Page
-
Multi-selection of items using the Ctrl or Shift keys
-
Open in new tab / Open in new page
-
Enter direct URL
-
Bookmark any page
-
Supports browser-based language translators
