52
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
9
Outputs
In
Outputs
, set the Label, Signal parameters, Patterns and Image correction.
Note:
- Go to
Preconfig >
Screens / Aux Screens > Outputs to set output resources.
9.1
Outputs main screen
Go to
Outputs
, the outputs main screen displays all outputs in a Grid view.
The following information are displayed per output:
- Resolution
- Format and rate (on hover)
- Output capacity
- Output number
- Output label
- Screen number using that output
9.2
Output settings
In
Outputs
, click an output to open its settings. The selected output is highlighted in the interactive
rear panel.
- Click
Outputs
to return to the outputs Grid.
- On the interactive rear panel, hover on an output connector to display information about this output.
- On the interactive rear panel, click an output to open its settings.
- Click
Blink LED
to identify the selected output connector on the physical rear panel of the unit.
Output signal
In
Outputs
, select an output. In
Signal
, the following settings are displayed:
Setting name
Description / Setting selection
Label
Rename the output
Mode
Set to follow internal rate or select a custom rate in the list
Format
Set the format for the output display
Color Space
Auto
or
RGB
(Full or Limited),
YCbCr
(
4:4:4
,
4:2:2
or
4:2:0
) and
ITU-R BT.
(
709
or
2020
)
Color Depth
8 bits
,
10 bits
or
12 bits
DVI mode
Enable to change signal into DVI signal if using a DVI connector on the display
HDCP
Disable*
;
Auto
;
HDCP 1.x
;
HDCP 2.x Type 0
or
HDCP 2.x Type 1
*Disabling HDCP reduces possible problems when the content is not fully HDCP compliant. When output HDCP is disabled, HDCP-
protected inputs are not displayed.
Recommendation: Always use high quality cables to prevent connection and bandwidth errors when using HDCP.
