42
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
Aux Screens
An Auxiliary Screen (Aux) is a special Screen displaying one layer in full screen. The content displayed in an
Aux can be an input, an image or a Program Screen.
Create an Aux Screen:
In
Preconfig
>
Screens / Aux Screens > Aux Screens tab, click an
Aux Screen
to show more options.
Note: An output must be set to
Aux
mode to be assigned in an Aux Screen.
- Use drag and drop to assign one Output to an Aux Screen.
- Use
to unassign the Output.
Note: After making changes, click
Apply
to save the new configuration.
Tip
: All pending changes are identified with a * and listed in the Summary. If needed, click
to cancel pending changes.
Rename a Screen
By default, all Screens are named
S1
,
S2
, or A1, A2 and so on.
To rename a Screen:
1.
In
Preconfig
>
Screens / Aux Screens, click a Screen or Aux Screen on
Enter Label…
2.
Enter a screen name.
7.4
Preconfig > Canvas
In
Preconfig
>
Canvas, set the pixel space and the outputs settings for each screen (custom rate,
position, AOI, pitch size, blending, etc.).
Fig. 10 -
Preconfig - Canvas
By default, all outputs are stacked and the screen size is the same as the assigned output with the highest
resolution.
