Analog Devices VISUALDSP++ 3.5, Manual

Page: 105 / 166

Vi+ Loader Manual 3-19
for 16-Bit Processors
ADSP-219x DSP Loader/Splitter
ADSP-219x DSP Loader Guide
This section provides reference information about the loader’s command
line interface. A list of the command-line switches appears in
Table 3-6 on
page 3-21 .
When using the loader within Vi+, settings on the Load page of
the Project Options dialog box correspond to the loader’s command-line
switches. For more information, see the Vi+ 3.5 User’s Guide for
16-Bit Processors or online Help.
ADSP-219x Loader Command-Line Reference
Use the following syntax for the loader’s command line.
elfloader sourcefile [ outputfile ] -proc processor [- switch …]
where:
•
sourcefile
—Identifies the executable file (
.DXE
) to be processed
into a single-processor boot-loadable file. A file name can include
the drive and directory. Enclose long file names within
straight-quotes,
“long file name“
.
•
outputfile
—Optional name of the loader’s output, a file with the
.LDR
extension. Each run generates a single output file.
•
-proc processor
—Part number of the processor for which the
loader file is to be built. Provide a part number for every input
.DXE
if designing multi-processor systems. Running the loader without
-proc
results in an error.
•
-switch …
—One or more optional switches to process. Switches
select operations and modes for the loader. See Table 3-5 on
page 3-20 for a complete list of the loader command-line switches.