Analog Devices VISUALDSP++ 3.5, Manual, Page: 122 / 166

ADSP-2192 DSP Loader Guide
4-12 Vi+ Loader Manual
for 16-Bit Processors
Example
elfloader -proc ADSP-2192 -core0 p0.dxe -core1 p1.dxe
This command line runs the loader utility with:
•
-proc ADSP-2192
—Directs the loader to produce an output file for
the ADSP-2192-12 processor.
•
-core0 p0.dxe
—Identifies the input file (
p0.dxe
) to be processed
for core 0.
•
-core1 p1.dxe
—Identifies the input file (
p1.dxe
) to be processed
for core 1.
• By default, since no output file is specified, the default output file
is named
p0.h.
File Searches
Many loader switches take a file name as an optional parameter. Table 4-4
on page 4-13 lists types the loader expect on files. File searches are impor-
tant in the loader operation. The loader supports relative and absolute
directory names, default directories. File searches occur as follows.
• Specified path—If you include relative or absolute path informa-
tion in a file name, the loader searches only in that location for the
file.
• Default directory—If you do not include path information in the
file name, the loader searches for the file in the current working
directory.
When you provide an input or output file name as a command-line
parameter, use the following guidelines.
• Enclose long file names within straight-quotes,
“long file name“
.
• Append the appropriate file extension to each file.