![background image](http://html1.mh-extra.com/html/amx/endeleo-udm-1604/endeleo-udm-1604_user-manual_2939039037.webp)
4-1
Section 4
Protocols and IR Learning
UDM1604-USG – 2.0 - 0606
4
Protocols
Protocols for serial and infrared devices used in the system can be
created from the
Protocols
option. These protocols will allow the UDM
Hub to control serial and infrared devices connected via the Hub.
For serial devices the following information is key to the successful
function of the serial device;
•
Serial cable and pinouts;
•
Serial settings for correct communication with
the device and
•
Manufacturer’s command strings equivalent to
the command to be executed from the UDM
Hub.
For IR devices the device’s Infrared controls (remote control key
presses) will have to be learned by the UDM Hub.
4.1
Creating a Serial Protocol
(1)
Click on the
Protocols
option.
(2)
If a serial protocol is required click on the downward
arrow beside the S
erial
Protocol
field. Click on
New
.
(3)
Name
the serial protocol appropriately and assign the
protocol a
setting
(baud rate, parity etc).
Figure 4-1: Creating a new serial protocol
Note;
When configuring the serial settings OP means
Odd,
Parity
and EP means
Even, Parity
.
(4)
Once the protocol has been named and a setting (baud
rate, Parity) configured, click on
Initialise –
this will
clear the RX of any preloaded serial commands.
(5)
Select an
Action
to be performed from the
Action
drop
down menu e.g. Power off or Power on.
Figure 4-2: Creating a serial command for the action
Summary of Contents for endeleo UDM 1604
