![background image](http://html1.mh-extra.com/html/amx/endeleo-udm-1604/endeleo-udm-1604_user-manual_2939039076.webp)
7-8
UDM1604-USG – 2.0 - 0606
Section 7
Advanced Administration
7.7.2
Resetting Video compensation settings
The
x
command resets all compensation settings at the RX back to
default.
(1)
Use Hyperterminal to connect to the RX via its serial
port.
(2)
At the command prompt type in
setup
. Once in
setup mode type in
x
to reset the compensation
settings if required.
7.8
Cascading Hubs
UDM Hubs can be connected (cascaded) together to increase the
number of inputs which can be delivered to the end points. This is
known as cascading hubs together.
The
Cascade In
port and
Cascade Out
ports will be used when cascading
2 Hubs together.
A cascade cable
UDM-EXP-01
will be required to connect Hubs together.
This cable can be purchased from Endeleo, as it is
not shipped
with
the Hub.
7.8.1
Configuring a Master Hub
A Master Hub will have to be configured (to synchronise audio) in any
cascaded system. This will normally be the first Hub in the system and
should follow a top (Master) to bottom (Slave) configuration. In theory
there is no limit to the amount of Hubs cascaded i.e. one Master only
but multiple Slaves.
To configure a hub as a Master Hub;
(1)
Click on the Setup option.
(2)
Click on the Cascade master option to configure the
Hub as a Master Hub.
Figure 7-7: Enabling a Master Hub
Summary of Contents for endeleo UDM 1604
