AMX endeleo UDM 1604, User Manual, Page: 73 / 94

7-5
Section 7
Advanced Administration
UDM1604-USG – 2.0 - 0606
7.6 Backend commands
In case of human error the Command Line can be used to perform
several Administrative tasks on the multi format video hub.
7.6.1 Changing the login password
(1) Create a hyperterminal session with the UDM hub
using default serial connections.
(2) To change the password enter the original password
and new password separated by a full colon at the
login prompt. For Example type in admin:endeleo
at the login prompt, to change the password from
admin to endeleo.
(3) Reset the Hub. A power off then on is now required.
7.6.2 Obtaining the Hub’s IP address via the Command Line
(1) Type i at the command prompt. Push enter .
Figure 7-3: Issuing the i command
7.6.3 Checking port details
Port details (resolution, port firmware) can be checked via the
command line also.
7.6.3.1 Multi format inputs
The multi format inputs located at the rear of the Hub are numbered
129 through to 132 for administrative purposes.
Multi format inputs
Input Input Number
A 129
B 130
C 131
D 132