![background image](http://html1.mh-extra.com/html/amx/endeleo-udm-1604/endeleo-udm-1604_user-manual_2939039075.webp)
7-7
Section 7
Advanced Administration
UDM1604-USG – 2.0 - 0606
(2)
Push
Enter
once the command has been entered.
(3)
The table below describes typical values returned
when using the
?
command on a Hub port.
Value
Description
Port 1
Port number on UDM Hub
01.11.00 Port
Controller
version
Clock Master 8406
Master (version)
Disconnected /
Connected
Connected to RX
Port Power
On or Off
Port Number
Checksum
Port in Master or Slave hub
7.6.4
Hub Temperature
To view the Hub’s internal temperature;
(1)
Connect to the UDM Hub using an appropriate tool eg
Hyperterminal.
(2)
At the command prompt type in
–h
to view the Hub’s
internal temperature.
Figure 7-6: Displaying the Hub temperature
7.7
Endeleo RX commands
Several RX commands can be used for information purposes.
7.7.1
Viewing the Video Compensation settings
The
z
command will report the current compensation settings
configured within the RX.
(1)
Use Hyperterminal to connect to the RX via its serial
port.
(2)
At the command prompt type in
setup
. Once in
setup mode to view the compensation settings type
in
z
.
Summary of Contents for endeleo UDM 1604
