AMX endeleo UDM 1604, User Manual, Page: 45 / 94

5-1
Section 5
Operating the UDM Hub
UDM1604-USG – 2.0 - 0606
5 Hub Status
All of the system control is handled using the Status page. From this
page it is possible to control:
• Which input is displayed on which output;
• Send device control messages to the display
device and
• Create an event for management via the
scheduling engine.
Figure 5-1: The main Status page
5.1 Selecting Inputs for display
(1) Click on the Status option.
(2) Each port on the hub has a drop down box, in which
will be displayed all of the inputs (configured in the
Inputs option) available to this particular Port.
Note;
Inputs mean inputs directly connected to the rear of the
chassis eg Inputs A-D, devices connected to IRTx ports
1 – 4 or TVM (Managed TV) ports connected to the
front of the UDM Hub at the AV Inputs ports.