![background image](http://html1.mh-extra.com/html/amx/endeleo-udm-1604/endeleo-udm-1604_user-manual_2939039052.webp)
5-8
UDM1604-USG – 2.0 - 0606
Section 5
Operating the UDM Hub
•
Device must be added to the system as a
Device and be assigned its learned protocol.
•
Port must be configured for Passthrough Mode.
5.4.1
Configuring a Device for Passthrough Mode
The device needs to be added to the system as both an input and as a
device.
(1)
Cable
the device as an input coming into the rear of
the chassis e.g. into Input A as for a normal input.
(2)
Add the device as an input in the
Inputs
option.
(3)
Learn
the device’s protocol using IR Learning – refer to
the Protocols section and Advanced Administration
section of this manual.
(4)
Add the device into the
Devices
option as normal and
assign it its IR protocol.
Note;
Ensure the relevant IR blaster port is cabled up to the
device also e.g. if the device is connected to Input A
cable IR port 1 to the device, if Input B cable IR port 2
to the device etc.
(5)
The device has now been added as an Input (and as a
device).
5.4.2
Configuring a Port for Passthrough Mode
To configure a port to access a Device in Passthrough Mode;
(1)
Select the
Status
option.
(2)
Once the main Status screen is visible click on
User
Control
for the correct port.
Figure 5-10: Placing a port into Passthrough Mode
Summary of Contents for endeleo UDM 1604
