NetLinx Programming – DXLink Fiber TXs/RXs
78
Instruction Manual – DXLink Fiber Transmitters and Receivers
In NetLinx Studio’s OnLine Tree, the DXLink Fiber Transmitters and Receivers each display their ports.
Note:
For additional information on using NetLinx Studio, refer to the “WebConsole & Programming Guide –
NX-Series Controllers” (available at www.amx.com).
Note:
All command text is based on a Unicode index.
Tip:
Occasionally new firmware versions affect SEND_COMMANDs. If a command does not produce the
expected results, we suggest checking the product’s current firmware version against the information in the
“Firmware Version” table on page 102.
FIG. 31
NetLinx Studio OnLine Tree - Ports 1-8 on DXLink Fiber Transmitter and Ports 1-7 on Receiver
Ports 1-8
on DXLink Fiber Transmitter
(device number 01000)
Port 1 - Serial ICSP (COM)
Port 2 - Not used
Port 3 - IR Output
Port 4 - IR Input
Port 5 - USB (HID) input and output
Port 6 - Digital Video/Audio Output
Port 7 - Digital Video/Audio Input
Port 1 - Serial ICSP (COM)
Port 2 - Not used
Port 3 - IR Output
Port 4 - IR Input
Port 5 - USB (HID) host data
Port 6 - Digital Video/Audio Output
Port 7 - Digital Video/Audio Input
DXLink Fiber Transmitter
DXLink Fiber Receiver
Port 8 - Analog Video Input
Ports 1-7
on DXLink Fiber Receiver
(device number 02000)
