Appendix B – Telnet (Terminal) Commands
109
Instruction Manual – DXLink Fiber Transmitters and Receivers
Telnet Commands (continued)
FACTORYFWIMAGE
Resets unit to factory firmware image and parameters and reboots the DXLink Fiber unit.
Note:
When a Transmitter is connected to a DXLink Fiber Input Board, the input board will
override the “ALL RESOLUTIONS” EDID and load the last stored EDID.
FWIMAGES
Displays firmware version information.
GET CONFIG
Displays the current connection settings.
Example:
>get config
Device number: 8010
Connection Settings
--------------------------------
Mode: NDP
System Number: 3155
Master IP/URL: 192.168.44.53
Master Port: 1319
Username:
Password:
IP Settings
--------------------------------
HostName: DXLF-TX-2075028
Type: DHCP
IP Address: 192.168.44.86
Subnet Mask: 255.255.255.0
Gateway IP: 192.168.44.2
MAC Address: 00:0f:3c:00:55:04
DHCP Server : 192.168.43.2
Lease Origin : THU 01/09/2031 12:59:02
Lease Duration : SUN 01/12/2031 12:59:02 (259200 sec)
Lease Renew (T1): SAT 01/11/2031 00:59:02 (129600 sec)
Lease Rebind (T2): SUN 01/12/2031 03:59:02 (226800 sec)
DNS Servers
--------------------------------
Domain suffix: amx.internal
Entry 1: 192.168.40.7
Entry 2: 192.168.40.8
Note:
The system number and IP addressing information displayed is reflective of actual
operating values, not stored parameters.
GET CONNECTION
Shows the Master connection information.
Example:
>get connection
Connection Settings
------------------------------
Mode: UDP URL
System Number: 1
Master IP/URL: 192.168.44.53
Master Port: 1319
Username:
Password:
GET DEVICE
Displays the device number.
Example:
>get device
Device Number
------------------------------------------
Stored Value: 0 (dynamic)
Active Value: 32005