![background image](http://html.mh-extra.com/html/amx/csg-500/csg-500_operation-reference-manual_2938109063.webp)
Telephone System Configuration
55
CSG SIP Communications Gateway Operation/Reference Guide
7.
Specify the number of seconds before the ring timeout occurs for the new Follow Me number. The ring
timeout for the new Follow Me number is the total amount of time from when the Follow Me feature is
initiated to when the call is accepted.
8.
Select the Dial Order in which this Follow Me number should be dialed to reach the user.
Selecting Ring after trying previous extension/number will cause the defined Follow Me number to
be called after the last entry listed in the Destinations box.
You must select
Ring after trying previous extension/number
if no other Follow Me number
exists in the
Destinations
box. Otherwise, you will be unable to save the Follow Me definition.
Selecting
Ring along with previous extension/number
will cause the defined Follow Me number
to be called simultaneously along with the last entry listed in the
Destinations
box.
9.
Click
Add
to add this Follow Me number to the
Destinations
box, or
Cancel
to discard it.
You may reorder the entries in the
Destinations
box by using the up and down arrows located to the far right
of each entry. If you wish to delete an entry, simply click the
X
located next to the up arrow.
Click
Save
to retain your changes or
Cancel
to discard them.
Then click
FollowMe Options
along the top to configure additional options for Follow Me.
The following self-explanatory options can be enabled or disabled:
Playback the incoming status message prior to starting the follow-me step(s).
Record the caller’s name so it can be announced to the callee on each step.
Playback the unreachable status message if we’ve run out of steps to reach the callee, or if the
callee has elected not to be reachable.
Click
Save
to retain your changes or
Cancel
to discard them. Then click
Apply Changes
to make the changes
available.
Directory
The
Directory
settings page gives you the ability to set your preferences for the Dial by Names Directory.
Dialing the directory extension gives callers the opportunity to search the telephone directory by first or last
name.
The ring timeout is not reset or cancelled when the prompt is played to allow
someone to accept or reject the call. If the ring timeout is met while that prompt is
being played, the call will be rejected and sent to voicemail.
FIG. 49
Follow Me Options
FIG. 50
Directory Settings
Summary of Contents for CSG-500
