background image

Telephone System Configuration

65

CSG SIP Communications Gateway Operation/Reference Guide

Click 

Update Polycom firmware

 to update the Polycom firmware or bootrom images on the CSG. A link is 

provided under the 

Download new Firmware

 button to get the latest archive names. The firmware and 

bootrom archive names must be specified exactly as they are at that link for the update to complete 
successfully. Click 

Download new Firmware

 after you have specified the latest archive names in the 

firmware and bootrom fields.
The download process may take a few minutes to complete, and even longer if your network bandwidth is 
limited. A message box will appear once the firmware has finished downloading.
The Polycom firmware and bootrom images will be installed during the next reboot cycle of the CSG.
Click 

Options

 on the left menu, select the 

Reboot

 tab, and then click 

Reboot Now

 to reboot your appliance. 

Rebooting your CSG will terminate any active calls.

The next reboot cycle will be increased by approximately 5 minutes during the 
installation process. In addition, you must reboot your Polycom phones for them to 
download the new firmware and bootrom images from the CSG.

Following an update or a restore of a backup, there may be a loss of user-created 
extensions. This occurs because the settings revert back to default extension ranges 
on the Options tab. If the ranges do not match the user-created extensions, they will 
not be visible in the UI. Changing the User Extensions option to fit your unique range 
restores the extensions to the UI. See the Options

section on page 66

 for more 

information.

Summary of Contents for CSG-500





















































































Reviews: