AMX CSG-500, Operation/Reference Manual

Page: 23 / 84

Telephone System Configuration
15 CSG SIP Communications Gateway Operation/Reference Guide
Telephone System Configuration
This chapter provides information on how to initially set up your telephone system via the CSG Interface. The
CSG Interface gives you the ability to set up your telephone system without the need to use command line
configuration. After connecting to the CSG, the primary menu is displayed, giving you the ability to configure
your system, as well as add features to your call system as your needs change.
Logging On to the CSG
Your CSG should already be connected to an internet or network connection, as described in the
Installing the
Hardware
section on page 9. In the address field of a CSG supported web browser, enter the IP address
assigned to your CSG. The default LAN IP address is 192.168.69.1.
To log on to the system enter the following credentials:

Username
: admin

Password
: <password>
The first time you log on you will be prompted to change your password from the default. You should have
already chosen a new password during the installation process. Once the log on process is complete the CSG
Interface home page will be displayed.
Subsequent Logins to the CSG
The method described above will work to log onto the configuration tool of the CSG. In addition, you
can log onto the CSG using the CSG's Network port once it has been enabled. In this case, open a web
browser on a computer which is located on the same network as the CSG. In the address field of the web
browser, enter the IP address of the CSG as defined during the initial installation.
FIG. 9 CSG Interface Login