88D User Manual
16
System Paths
It is possible to assign the System Paths (TB, LS1, LS2 and the SELs) to the AFU.
TB is the talkback bus, LS1 and LS2 are the Listens used for the AFL and PFL output
and the SELs (SEL, SE2, SE3, etc.) are used by the monitoring system.
In addition when working in surround, film listens (FLS1 - 8 surround solo bus) and
film monitors (FLM1 – 8 surround monitor bus) can be configured depending on
surround format required.
To assign a System Path to the AFU press and hold the Ext key in the SLS section
and press the AFU Access key. Use the arrow keys to scroll through the system
paths.
Note:
The Listens (LS1 and LS2) are not the small loudspeakers (L/S 1 and L/S 2).
To interrogate an AFU Logicator setting
Touch the Logicator. The current setting and the name of the assigned path will be
displayed in the AFU Parameter display.
To copy control settings in the AFU
Press the COPY key in the Console Global Control Panel. The channel displays will
flash the message 'Copy'. The touch LEDs on all controls in the AFU will illuminate
red to indicate that they are in scope and will be copied.
To select individual controls to be copied touch the required Logicators on the AFU.
When the first control is touched, the rest of the AFU will be taken out of scope. The
touch LEDs will toggle on and off each time a control is touched.
To select whole processing elements to be copied press the required ON/OFF keys.
All touch LEDs in the selected section will toggle on and off each time the ON/OFF
key is pressed.
To execute the copy press and hold down the ACCESS key on the source path to
copy. The ACCESS LED will illuminate and its display will flash 'Copy Src'. Press the
ACCESS keys for the destination paths in turn. The displays for selected destination
strips will flash 'Copy Dest' and the copy will be executed.
Summary of Contents for 88D
Page 1: ...88D User Manual 1 ...
Page 8: ...88D User Manual 8 3 Console Surface ...
Page 46: ...88D User Manual 46 ...