88D User Manual
22
Copy
Control values and switch states may be copied between paths.
Press the COPY key, the alphas will flash 'Copy'. Then press the Access key for the
path you wish to copy values from. The scope defaults to include all controls
including faders and mutes, all available mode and process keys will illuminate red.
When you now press either Mode keys (for individual controls) or Process Keys (to
include all controls in that process), it is possible to reduce the scope to nothing and
add elements in. This can also be done on the AFU by touching logicators.
To add/subtract faders and mutes, use the Fader Mode and Cut Mode keys above
the fader.
When the scope has been set, hold the Access key for the source path, and then
press the Access keys for destination paths.
Press COPY again or press CLEAR to exit Copy mode.
Save the console configuration with KEEP
Clear
Accessing this key clears the copy, links & gangs modes. Holding this key and
touching a control parameter resets this control to its default setting. I.e. Holding this
and touching a fader would set the fader position back to unity.
Path Edit
Pressing this key displays the path edit window on the encore screen. This allows the
processing order to be manipulated by dragging and dropping items on the screen
into the path. By pressing the relevant channel access keys, this operation can be
performed over many paths. Pressing the path edit key again allocates the change in
signal processing, if a change was made otherwise the mode is exited. The audio is
muted while this operation takes place and this allocation takes approx 15 seconds.
The path edit key can also be used for swapping paths on the console surface. By
using the access keys faders can be swapped with each other. e.g. pressing channel
1’s access key and channel 3’s access key together they will swap. The channel
order on the surface would then be 3,2,1,4,5,6,7,8,9 etc.
Clear exits this function without allocating any processing. Useful when just swapping
channels on the surface.
Summary of Contents for 88D
Page 1: ...88D User Manual 1 ...
Page 8: ...88D User Manual 8 3 Console Surface ...
Page 46: ...88D User Manual 46 ...