manualshive.com logo in svg

AMS Neve 88D, User Manual

The Kramer 88D user manual is the ultimate guide to understanding and utilizing the full potential of this incredible product. Packed with detailed specifications and step-by-step instructions, it ensures seamless operation and optimal performance. Download your free manual now at manualshive.com to unlock the true potential of your Kramer 88D.

Share
Download
background image

AMS Neve Power Supply Safety Information     Issue 2

Information Importante sur la Sécurité

Tout matériel AMS Neve est du type Classe I, ce qui signifie qu’il doit avoir une bonne mise à la terre pour
fonctionner en toute sécurité. Une bonne mise à la terre est signalée comme telle par la compagnie locale de
distribution de courant.

Ce matériel et son alimentation en courant ont été testés pour être utilisés sur des systèmes de courant type TN (source d’énergie directement reliée à
la terre, les parties exposées de l’installation étant reliées à une prise de terre). Dans ce type de système de courant, la compagnie de fourniture
d’électricité garantit que le Neutre est relié à la Terre. Les systèmes de fourniture de courant TN sont la norme en Grande Bretagne et en Allemagne.

Parties Conductries

Exposées

Parties Conductries

Exposées

Mise à la Terre

Locale du Matérial

Mise à la Terre du

Fournisseur de

Courant

Mise à la Terre

du Fournsseur

de Courant

Exemple de Systéme de Courant TN

Exemple de Système de Courant IT

Impèdance

Dans les 

Pays Scandinaves

 ainsi que dans certaines 

régions rurales de la France et de la Belgique,

 on trouve des alimentations de courant type IT

(la source est isolée de la terre ou par l’intermédiaire d’une impédance, l’installation est isolée de la terre localement). Il est possible que de graves
dangers pour la sécurité existeraient si le matériel était branché directement sur une alimentation de courant IT. Il est possible de prendre des mesures
telles que l’utilisation d’un UPS classé IT pour faire marcher le matériel sans risque. Si vous avez le moindre doute votre compagnie locale d’Electricité
doit pouvoir vous conseiller sur ce sujet.

Courant à Fuite Terre Elevée

Certains matériels AMS-Neve sont désignés

 “

Courant à Fuite Terre Elevée”

( >3.5mA). Ceci vaut généralement pour toutes les consoles digitales d’une certaine taille ainsi que dans les cas où il est indispensable d’utiliser les
bornes de terre séparées, dont le matériel est muni, pour assurer la sécurité. Les informations et l’étiquetage sont fournis avec chaque produit lorsqu’ils
sont nécessaires.
Matériel avec Fuite Terre Elevée au 28 août 1997 :

Libra Console control surface sauf 24 fader sans redondance.

Capricorn Console control surface.
Capricorn DSP rack.

Logic Console control surface avec Vicor PSUs.

Veuillez contacter AMS Neve Customer Support Department (Département de Service Après-Vente) si vous avez des doutes sur les besoins de mise à
la terre.

Isolation du Matériel et Alimentations en Courant Redondant

Lorsque le courant arrive au matériel par l’intermédiaire de prises de réseau IEC, celles-ci doivent être enlevées avant tout entretien pour assurer la
sécurité. Les interrupteurs du réseau NE DOIVENT ABSOLUMENT PAS être utilisés comme moyen d’isolation de sécurité.
Les produits comprenant des alimentations en courant redondant possèdent généralement deux prises de réseau IEC. Lorsque ceci est le cas il est
indispensable  d’enlever les DEUX Prises IEC pour isoler totalement le matériel. Les informations et l’étiquetage sont fournis avec chaque produit
lorsque ceci est nécessaire.

Summary of Contents for 88D






















































































Reviews:

No comments

Related manuals for 88D

DigiTech Vocalist Live FX Owner'S Manual preview
Vocalist Live FX
Brand: DigiTech Pages: 76
Numark DM 1885X Owner'S Manual preview
DM 1885X
Brand: Numark Pages: 16
Fantini Rubinetti NOSTROMO E881 Manual preview
NOSTROMO E881
Brand: Fantini Rubinetti Pages: 16
Doyon AEF 015SP Owner'S Manual preview
AEF 015SP
Brand: Doyon Pages: 21
Omcan MX-CN-0020-G Instruction Manual preview
MX-CN-0020-G
Brand: Omcan Pages: 28
Intellijel Pedal I/O 7U Case Adapter Manual preview
Pedal I/O 7U Case Adapter
Brand: Intellijel Pages: 13
Samson MDR 16 Specification Sheet preview
MDR 16
Brand: Samson Pages: 2
Technomad DesktopBox Series User Manual preview
DesktopBox Series
Brand: Technomad Pages: 2
MQ Multiquip WHITEMAN Series Manual preview
WHITEMAN Series
Brand: MQ Multiquip Pages: 26
Drolo Stamme[n] Manual preview
Stamme[n]
Brand: Drolo Pages: 4
AHB 16-4-2 Operating Manual preview
16-4-2
Brand: AHB Pages: 10
Nady Audio MPM 8175 Owner'S Manual preview
MPM 8175
Brand: Nady Audio Pages: 12
Nady Audio MPM 4130 Owner'S Manual preview
MPM 4130
Brand: Nady Audio Pages: 12
Termozeta 401010 Instruction Manual preview
401010
Brand: Termozeta Pages: 28
Taramps T 0302 Instruction Manual preview
T 0302
Brand: Taramps Pages: 20
Rane FLM 82 Operating And Service Manual preview
FLM 82
Brand: Rane Pages: 4
Gemini PDM-10 Operation Manual preview
PDM-10
Brand: Gemini Pages: 6
Malekko SNEAK ATTACK User Manual preview
SNEAK ATTACK
Brand: Malekko Pages: 8

Brands by name

Popular brands

Load more brands