1-63
S-4001 ISBH+I SM 30°
Released: 09/2017
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
G - MAINTENANCE
2. PERIODIC MAINTENANCE
once a day
(8 hours of operation)
- cleaning of the sewing mechanism area and inner frame of the machine
- lubrication of mechanisms - see section G4.
M3
M4
M5
M6
M8
M10
0,5
1,2
2,5
4,0
0,6
1,5
3,0
5,0
8,0
10,0
0,8
2,0
4,0
7,0
16,0
30,0
Recommended values for screws tightening (Nm):
3. LUBRICATION DIAGRAM
The machine is mostly equiped with needle and ball bearings, which in combination with single lubrication circuit
decrease the requirements for maintenance.
Circuit I
- with the oil supply in oil indicator for lubrication of the bite, feeding and looper levers and worm gears. In
case of replacement of any part of distribution, it is possible to order the tube kits and wicks. To connect the tubes -
see picture.
Circuit I
once a week
(40 hours of operation)
- visual check - external and internal mechanisms
- fill oil into reservoir with oil level indicator, or sooner
if required
once a month
(160 hours of operation)
- check of the clearance in sewing mechanism drive
- check of the screw connections tightening (obtain
values below)
- check of condensate in regulator
- check of dirty of cleaning pads in control box