AMF S-4001 ISBH+I SM 30, Parts And Service Manual, Page: 32 / 90

S-4001 ISBH+I SM 30°
1-20
D - MACHINE CONTROLS
Released: 09/2017
E-mail: service@amfreece.cz; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
3. STITCHING HEAD PARAMETERS MENU
Enter the sewing head program menu by pressing button .
Setting the machine cycling. (On/Off).
If the button lights, function is active.
Setting the foot pedal position. (Possible setting 1step/2steps).
Adjustment for position 1 means, that the machine closes
clamps and starts sewing in one moment.
Adjustment for position 2 means, that the machine closes
clamps on 1 position and on position 2 stars sewing cycle.
Selecting the number of stitches in slow start.
(Range 0 - 3 rpm)
Setting the slow start speed at the sewing cycle.
(Range 500 - 1000 rpm)
Maximal speed.
(Range 1000 - 3840 ppm)
Correction of the needle bar upper
position. (Range 0 - 600 imp)
Draw-off delay.
(Range 60 - 150 ms)
Timming of the knife/draw-off activation.
(Range 30 - 200 ms)
Setting the trim delay.
(Range 0 - 200 ms)
Setting the trim timing activation.
(Range 30 - 60 ms)
Setting the delay between the sewing
cycles. (Range 500 - 2500 ms)
Clamp feets opening delay adjustment,
in the end of cycle. (Range 0 - 100 ms)
To return to the main screen, press key.
Off
A
B
On
Turning the second thread
tensioner in bar on / off.
Setting the number of bar stitches sewn with
slow speed (in the range of 0 - 6 stitches).