AMF S-4001 ISBH+I SM 30, Parts And Service Manual, Page: 13 / 90

S-4001 ISBH+I SM 30°
1-1
Released: 09/2017
E-mail: service@amfreece.cz; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
A - INTRODUCTION
1. BASIC INFORMATION
The sewing machine S-4001 ISBH+I SM 30° is designed and produced to be very reliable. Important design goals
have been to provide a safe machine that is simple and inexpensive to maintain.
The patented rotary needle bar shaft drive, a major benefit, delivers longer needle bar life. The added benefits of
lower vibration and less noise, translate into less operator fatigue.
Simple buttonhole length adjustment located outside the machine, eliminates the need for tilt back, while the quick
stop repair function delivers safety and makes repairs easier.
Special electronic and mechanical safety devices protect the operator and the machine. There is a special power lock
out switch that permits the machine to be locked in the off position, so that it cannot be cycled accidentally. There is
an emergency off switch. There is a low air pressure detector that will not permit machine operation if air pressure
is dangerously low.
There are safety-warning labels on the machine in all areas that require special care. These must not be removed.
If they are lost replace them immediately.
You are the most important safety equipment of all. Be sure you understand the proper operation of the machine.
Never remove safety mechanisms or labels. We have made every effort to provide the safest possible machine, but
without complete knowledge of how this machine operates, and the use of proper care by the operator, this machine
can cause serious injury or death. That is why there are safety warnings throughout these instructions that carry one
of these messages.
There are four categories of safety instructions in this manual:
DANGER! Ignoring instructions may endanger operator’s life.
CAUTION!
Ignoring instructions may cause a serious injury of the operator or damage the machine.
WARNING! Ignoring instructions may cause damage on the machine or injury of the operator.
NOTICE! Breaking procedures may cause functional problems of the machine.
We recommend that servicemen from AMF Reece supervise the installation of the machines and initial training of
your mechanics and operators.
The most effective method ensuring safety of operators working on the machine is a strict safety program including
instructions for safety operation. Operators and servicemen should wear safety glasses.