S-4001 ISBH+I SM 30°
1-15
Released: 09/2017
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
D - MACHINE CONTROLS
1. BUTTONHOLE SEWING PROCEDURE
1.1. Bring the machine to the home position according to the section C1.
a) sewing without indexer
Check, if the message
appears on the display. If not, follow steps below:
After this setting, the machine will sew with the indexer
according to the parameters set in the program.
1.2. Be certain that the machine is threaded correctly
according to the section C3 and insert the sewn work
under the clamp feet. To place a buttonhole, use the
adjustable front stop
1
and side gages
2
.
Note:
There are no side stoppers
2
on machines with
positioning laser lights.
1.3. When the foot pedal
3
is pressed to the first position,
the sewn work is clamped by the head clamp feet.
(Releasing the foot treadle will raise the clamp feet).
Note:
It is possible to set the control so that both the
clamping and the sew start are simultaneous, consult
the programming section for this information.
The machine sews only 1 buttonhole.
press
press
b) sewing with indexer
Check, if the message
appears on the display. If not, follow steps below: