S-4001 ISBH+I SM 30°
1-5
Released: 09/2017
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
A - INTRODUCTION
5. INSTRUCTIONS FOR OPERATOR SAFETY AND MAINTENANCE
When installing the machine we recommend the
minimum clearances noted above around the
machine. Read all of the instructions that follow. DO
NOT PUT THE MACHINE INTO OPERATION UNTIL
YOU ARE COMPLETELY FAMILIAR WITH ALL
INSTALLATION AND OPERATING INSTRUCTIONS.
DANGER!
•
Before connecting the machine to the power
supply, be positive that all safety covers are
correctly installed.
•
Always engage the power lockout switch, or
disconnect the main power supply, before
removing any safety covers.
WARNING!
•
Locate the Emergency Stop button.
Be sure you know how to use it.
•
Be sure that you have a reliable and uniform power supply.
•
Be sure that all electrical supply lines are in good condition and have no signs of damage to avoid electrical shock.
•
If any covers become damaged, they must be repaired or replaced immediately.
•
Do not touch moving parts of the machine while it is operating.
•
Keep clear of the needle.
• Always switch off the main power before changing the needle.
•
Before cleaning the machine or performing service to the machine, engage the power lock out switch or disconnect
the main power supply.
•
When the machine is not in use engage the power lock out switch or disconnect the main power supply.
•
When this machine is used incorrectly, or is incorrectly maintained, it can be dangerous. Everyone who uses this
machine, or maintains this machine, must be completely familiar with this manual.
CAUTION!
•
Perform all regular service as described by this manual.
• If there is any problem with the power supply, turn off the main power switch.
•
Do not remove, paint over, damage or in any way change safety labels. If a safety label cannot be easily read,
replace it.
•
Long hair and loose clothing may be dangerous near any machinery. Always contain long hair and avoid loose
clothing, so that it cannot be caught by machinery and cause injury.
• Never use this machine while under the influence of drugs or alcohol.
•
If anything seems to be operating incorrectly in the machine call for maintenance assistance immediately.
•
Be sure that there is adequate light for safe operation. A normal minimum light level is 750 lux.