S-4001 ISBH+I SM 30°
1-17
Released: 09/2017
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
D - MACHINE CONTROLS
1.6. b) sewing with indexer
If it is necessary to interrupt the cycle during the sewing with indexer (example: needle breakage, thread
breakage ):
b1) Press the foot pedal to the second position, the machine stops in the home position after buttonhole is
finished.
b2) Indexer clamp feet stay down. By the
and
buttons you can shift indexer clamp feet to the
desired position and finish sewing by pressing the foot pedal
3
.
b3) If you need to take out the fabric, you can do it by pressing the foot pedal
3
to the first position and rejecting
then. You can hold the fabric by pressing the foot pedal
3
.
b4) If it is necessary to interrupt the cycle because of the operator safety:
press Emergency Stop Button
4
. The machine stops immediately, the indexer clamp feet raise up
and move to the home position - see b2. Release the button
, press
button and sew
one dummy buttonhole, to bring the needle bar to the home position.
1.7.
When the work is done, switch the machine off by turning the main switch
5
to the 0 position, then
stop the air supply by closing the valve which is behind the regulator.