AMF S-4001 ISBH+I SM 30, Parts And Service Manual, Page: 18 / 90

S-4001 ISBH+I SM 30°
1-6
Released: 09/2017
E-mail: service@amfreece.cz; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
A - INTRODUCTION
C.C. E.A. laser product has been designed and manufactured specifically for the work place and for use in working,
conditions.
It complies to the existing work safety regulation included in directive 73/23 and subsequent 93/68.
It has been made following to the International Standart CE/EN 60825.
Use C.C.E.A. laser system belong Class II. To this class emit low-power beam =/< lmW to be seen into the visible
spectrum. They are not considered dangerous if just the laser beam will be accidentally (fraction of second) pointed
at the eyes. The palpebral
reflection would not allow a length of exposure higher than 0,25 seconds. It is absolutely necessary wearing specific
safety glases (with declared wavelength and filter), when eyes are directly and lasting exposed at the laser radiation.
Our Lasers are followings: 650 nm.
LABELLING:
The label showing the laser class must bepermanently attached so as to be clearly visible and readable when the
system is working, for maintenance and other needs. Labels must be see without a direct exposure at the laser
radiation.
CAUTION:
LASER RADIATION
DO NOT VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS
Read carefully the supplemental rules described
below before setting up laser system.