AMF REECE S-311, Parts And Service Manual, Page: 71 / 142

15,2
+
+
-
-
15,2
S-311
1-59
Released:01/2014
E-mail: service@amfreece.cz; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
E - STANDARD MACHINE ADJUSTMENT
16.9. Elektronic adjustment of the CT parameters
a) Electronic adjustment of trimmed threads tails
b) Electronic adjustment of the clamp feet elevation during the lower thread and gimp trimming
- Time for the clamp feet elevation before trimming knives activation (range 0 – 10, i. e.
0 – 100 ms); initialization = 4.
- Time for the clamp feet elevation during trimming knives activation (range 0 – 10, i. e.
0 – 100 ms); initialization = 4.
When thick materials are sewn, times for the clamp feet elevation need to be adjusted so that trimming knives can
pass under the sewn material freely and trim the lower thread and the gimp (low values for thin materials, high for
thick materials).
Standard adjustment
Increase parameters
on flexible threads