S-311+ ACL
1-19 ACL
Released: 01/2014
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
D - OPERATING THE MACHINE FUNCTIONS
4.3. USING THE PROGRAMMED BUTTONHOLE IN CYCLE MODE:
Example
: You wish to sew buttonholes in program no 1 in this order:
1, 1, 1, 2
.
1. Press the key for setting up the program number.
Numerical keypad appeears. Select the program number
1
and confirm
.
2. Press the key
.
The display shows the screen where you can select the order of buttonholes to be sewn. Press the first number and
select the number of buttonhole
1
(buttonhole which is to be sewn first) with the keypad. Confirm by pressing ENT.
Then press the second key and select the next buttonhole number in order
1
. Repeat this process until all buttonholes
to be sewn are set. If you select
0
at the end, the machine starts sewing from the first selected buttonhole (it means
1
).
Cycle mode screen
Cycle mode screen with complete set up
3. Press
to save the buttonholes set up in the program
1
.
Go back to the main screen
.
4. The display shows the number of program
1
and the number of the buttonhole
1
,
which is to be sewn first.
5. Once the buttonholes
and
are finished, the buttonhole number changes into the next one that is to be
sewn
, in means
2
.
6. If thread breaks during sewing any buttonhole, use
Stopped
and
Stopped
key on the main screen to go back onto the
required buttonhole and sew it again.