AMF REECE S-311, Parts And Service Manual, Page: 42 / 142

S-311
1-30
D - MACHINE CONTROLS
Released:01/2014
E-mail: service@amfreece.cz; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
Buttonhole lenght
without bar
Bar Correction
Buttonhole lenght
(depends on machine type)
Stitches density
(range 0.5 - 2.0 mm)
Electroniccaly
adjustable bite
size (range ± 0.3 mm)
First and second row
of stitches adjustment
(range ± 1.0 mm)
Table feeding in first and
second row of stitches
(range 0 - 100)
Return to main display
Caution!
If E 50 appears on the display, total buttonhole lenght is
exceeded.
Example:
The S311 CT machine is supplied to sew the buttonholes
with flybar and cross bar. The clamp feet are supplied with
the machine, according the required CT variant (16-20;
20-24; 24-28; 28-32), on which is the lenght of cutting L1
marked (example 16 - 20 mm). To trim the lower threads,
the total buttonhole lenght L in this case can not exceed
the lenght stated on display. For example for CT 20.
4. BUTTONHOLE PARAMETERS ADJUSTMENT