S-311
1-9
A - INTRODUCTION
Released:01/2014
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
7. SPECIAL DEVICE
7.1. Working light
1
- order number 12.0008.4.875
7.2. Manual machine control
2
- order number 03.5519.0.007
- allows to change the foot machine control for manual by switch
installation on the table and changing the cables
7.3. Ruler
3
- order number 03.5511.0.003
7.5. Thread nipper
5
- order number 03.5519.4.013
This equipment is used to hold the upper thread at the beginning of sewing
cycle.
It eliminates the skipping of stitches at the beginning of sewn buttonhole,
especially when sewing the fly bar.
It is supplied as standard to the following versions: LTT, AF+I and CT+I
(Indexer for sewing the jackets ).
7.4. Voltage control - relay HRN 35
4
- order number 06.1900.0.000
The machine operation is ensured when the power supply is in range AC 230V
± 10 % (EN 60204-1). The manufacturer recommends to equip the machine with the
relay HRN-35 in case of larger fluctuation of power supply.
It prevents the machine from damage and in case of large decrease of power supply,
the operator is informed by error message.
If the power supply range is exceeded - max 250V and min 190V the voltage guard -
relay HRN-35 which ensures that machine does not start. After the power supply is in
required range, it is possible to start the machine.