S-311
1-39
Released:01/2014
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
D - MACHINE CONTROLS
13. BUTTONHOLE PROGRAMMING
1. Press the button
1
in the right bottom corner on the screen.The numerical display appears on the screen.
Choose the buttonhole number
1
and press
.
2. Program the buttonhole shape according to the sections - D3, D4, D5.
3. Set buttonhole parameters will be automatically saved under the buttonhole number you have chosen.
Usage of the programmed buttonhole in the CYCLE MODE:
Example:
In the program number
1
you want to sew buttonholes in the following order:
2, 1, 3, 4, 1
.
1. Press the button program number setting
The numerical display appears on the screen. Choose program number
1
and press
.
2. Press
button. The screen, where it is possible to set the order of sewn buttonholes,
appears on the display. Press the first number and using the numerical display set the
buttonhole number
2
, which will be sewn as the first. Press ENT to confirm. Next, press
the second number to set the buttonhole number
1
. Follow these steps to set all the
buttonholes which will be sewn. If
0
is selected, the cycle mode will return to the first set
buttonhole
(2)
.
3. Press
to save the set buttonholes to program number
1.
Return to the main screen
.
4. Program number
1
and buttonhole number
2
which will be sewn as first appear on
the display.
5. When the buttonhole is sewn, the number of the next buttonhole in the cycle
(1)
will be displayed.