70 mm
64 -0,3 mm
X
Y
S-311
1-49
Released:01/2014
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
E - STANDARD MACHINE ADJUSTMENT
8.3. The knife in the axis X in the anvil
6
loosing the screws
5
and change safely the position, to the right or to the
left. Tighten the screws.
8.4. The knife stop in the anvil
6
adjust for 70 mm after loosing the screws
7
.
8.5. The pressure of the pneumatic system is adjusted with the regulator
8
for 0,6 MPa. The pressure for cutting
knife is adjusted with the regulator
10
(0,4 MPa). This pressure is suitable for all materials for cut lengths to 30mm.
For difficult cut, increase the pressute for 1/2 rotation anticlockwise.
8.6. The sensor
9
on the cutting cylinder is adjusted approx. for 43 ± 1mm (according the machine tolerances).