Ametek TM2000 Pro, User Manual

Page: 83 / 148

Calibration | 5-11
The verify display appears:
5. Press Enter once the O
2
reading on the far left of the first display line stabi -
lizes.
If you specified a recovery time, the remaining recovery time displays:
The system then returns to monitoring process readings.
O2 xx.x Set xx.x
Press ENTER to Verify
Recover xx:xx
System Verifying Cal
The reading on the far
right of the first display
line shows the set point
value you entered for the
O
2
zero gas using the
Configure Verify menu
option.
This set point value
should match the value on
your verify gas cylinder