Ametek TM2000 Pro, User Manual, Page: 71 / 148

Controller / User Interface | 4-23
set Current Mode option
Define either a 0-to-20 or 4-to-20 mA analog output range for the selected
analog output port.
This output is dependent on both the range of readings you define (see the Set
Current Range section), and on the function you track on the analog output.
setting the current mode
1. After selecting an analog output port, from the Analog Range Key, select
Set Current Mode .
2. Select 4‑to‑20 mA Mode or 0‑to‑20 mA Mode.
output filtering option
Filter out quick transitions in readings to allow a smoother analog output.
Setting output filtering
1. After selecting an analog output port, from the
Analog Range Key
select
Output Filtering.
2. Enter an output filtering value between 1 and 100 where XX is the current
filter value, then press
Enter
.
Note that 100 equals no filtering, and 1 equals the highest possible filter
value. Note that you should enter 01 to enter 1; 07 to enter 7; 70 for 70, etc.
The default value is 100 (no filtering).
Out # y is set for
4 - 20 ma
or
Out # y is set for
0 - 20 ma
100 = FAST 1 = SLOW
Fltr = XX New #?
NOTE
