Ametek TM2000 Pro, User Manual

Page: 73 / 148

Calibration | 5-1
Calibrate Key
Overview
Calibrate Key Function/Options
Initiate Cal Start an automatic, remote, or manual calibration
Initiate Verify Start an automatic, remote, or manual verify
Cal/Verify Data View latest calibration and verify data
Cal Gas Values Enter calibration gas values to match known values of calibration gas
cylinders
Inject Cal Gas Set pressure and flow of RCU gases without performing a calibration
Set Cal Timers
(applies only for auto
cal operations with
RCU, except for set -
ting time and date)
Set control unit time/date ( Set Time and Date )
Enable or disable auto cal cycles (Auto Cal/On/Off )
Set cal gas times for auto cal/verify operations ( Set Auto Timers )
Define recovery durations after a cal/verify ( Recovery Duration )
Configure Verify Enter verify gas value
Enter acceptable verify range
The
Calibrate Key
uses the Series 2000 control unit to calibrate your analyzer.
The control unit provides features that make calibrating your analyzer easy and
also includes a means for the system to periodically calibrate itself.
All oxygen alarms are disabled during calibrations or verifications,
as well as during the recovery time after a calibration or verifica -
tion. Use the Analog Range key to set whether analog outputs
should follow the calibration reading or hold at the last process
reading.
NOTE

Figure 5-1.
Calibrate Key menu
options.