Ametek mocon Dansensor MAP Mix ProVectus, User Manual

Page: 53 / 80

Dansensor
®
MAP Mix Provectus EN User Guide 51
P/N 300862-K
11/2019
General setup
Selecting General setup from the Main menu will display a menu with available setup
parameters.

“Supervisor” access level is required for this menu, as the parameters in this menu control the
basic functionality of the device.
The General setup menu holds the following items:
Mixer configuration Opens the Mixer configuration screen

See "Mixer configuration" on page 52 for details.
Network setup Opens the Network setup screen

See "Network setup" on page 54 for details.
Data log setup Opens the Data log setup screen

See "Data log setup" on page 54 for details.
COM2 protocol PBI For control of a slave mixer

Defalt setting at start-up. When Termial
Server

has been selected, device will return to PBI

protocol when switched Off and On.
Terminal Server For configuration via terminal server.
Backlight Adjust display background light (1-10)
Contrast Adjust display contrast (1-10)
Brightness Adjust display brightness (1-10)
The “Backlight", "Contrast" and "Brightness" items are all
related to the display readability. Selecting each setting brings
up a new window where value can be set from 1 to 10.

Setting impact is seen while adjusting.
Formats/Units/Time Opens the Formats/Units/Time screen

See "Formats/Units/Time" on page 59 for details.
Reset gas consumption Resets the gas consumption counters in the “Gas
consumption since....” section in “Diagnostics”.
Supervisor PIN code setup Setting up the four-digit PIN code required for changing from
User access level to Supervisor access level.

(See "Access level" on page 60 for details).
General setup
Mixer configuration
Network setup
Data log setup
COM2 protocol
Backlight
Contrast
PBI
8
9