Ametek mocon Dansensor MAP Mix ProVectus, User Manual

Page: 15 / 80

Dansensor
®
MAP Mix Provectus EN User Guide 13
P/N 300862-K
11/2019
The mixer can be installed for either "Flow" or "Buffer" operation. The main difference is in the
installation (see explanation below).
“Flow”
The "Flow" mixer feeds gas directly to a line in the packaging machine. The built-in pressure
sensor has no control function but is solely used for monitoring of the output pressure.
“Buffer”
The "Buffer" version, which is typically used by vacuum packers, feeds gas to a buffer tank
from where the packaging machine gets its gas supply. The built-in pressure sensor is used to
maintain the set buffer tank pressure.
NOTE! We recommend that the buffer tank has a separate connection for the
pressure sensor. If this is not the case make sure to establish a connection on the
inlet string as close to the buffer tank as possible.
WARNING! Make sure that the gas outlet is NEVER blocked or restricted in front of
the buffer tank.

PS
MIX
OUT
FLOW
PRESSURE
TO PACKAGING
MACHINE
Pressure
Sensor 4
PS PS
MIX
OUT
MIX
OUT
TO PACKAGING
MACHINE
RECOMMENDED INSTALLATION ALTERNATIVE INSTALLATION
TO PACKAGING
MACHINE
BUFFER TANK
PRESSURE
BUFFER TANK
PRESSURE
Pressure
Sensor 4
Pressure
Sensor 4
BUFFER
TANK
BUFFER
TANK
MIX
OUT
TO PACKAGING
MACHINE
BUFFER
TANK