Ametek mocon Dansensor MAP Mix ProVectus, User Manual

Page: 57 / 80

Dansensor
®
MAP Mix Provectus EN User Guide 55
P/N 300862-K
11/2019
Network logging Select whether or not network logging is required.
No No network logging
Yes Network logging enabled
(Below parameters only appears when “Network Logging” is set to
“Yes”).

Network logging Select required data logging output format:

mode Compatible (Default)

Data format as used on devices

with firmware versions < 4.2.0.

See table on page 56 .
Advanced New data format with more

information and many new

values.

See table on page 57 .
Server IP Set up an IP-address to be used for collecting

log data for each measurement via LAN.

This requires for setting up of a Server Port

number as well.
Server Port See above.
Acknowledge Acknowledge byte can be used if a

“handshake” is required for each measurement

between device and server, each to be set up

to same value.
Disable network Select whether or not network errors should

errors be disabled.

Allows for continued operation while LAN is

not connected.