American Megatrends Excalibur PCI, User Manual

Page: 70 / 102

Chapter 6 WinBIOS Setup
66
Advanced Setup,
Continued
Memory Test Tick Sound
This option enables (turns on) or disables (turns off) the ticking sound during the memory test. The settings are
Enabled or Disabled.
Memory Parity Error Checking
This option enables or disables parity error checking for system RAM. The settings are Enabled (all system RAM
parity is checked) or Disabled (parity is checked only on the first 1 MB of system RAM).
Hit <DEL> Message Display
Disabling this option prevents
Hit <DEL> if you want to run Setup
from appearing when the system boots. The settings are Enabled or Disabled.
Extended BIOS RAM Area
Specify in this option if the top 1 KB of the system programming area beginning at 639K or 0:300 in the BIOS area in
low memory will be used to store hard disk information. The settings are
Top 1K or 0:300.
Wait for <F1> If Any Error
AMIBIOS POST runs system diagnostic tests that can generate a message followed by:
Press <F1> to continue
If this option is enabled, AMIBIOS waits for the end user to press <F1> before continuing. If this option is disabled,
AMIBIOS continues the boot process without waiting for <F1> to be pressed. The settings are
Enabled or Disabled.