Excalibur PCI Pentium ISA Motherboard User's Guide
23
Step 1 Set Switches and Jumpers,
Continued
J5 Select Enhanced Parallel Port DMA Acknowledge
J3 is a three-pin header that selects the parallel port DMA Acknowledge line.
J3 Pin Setting
DMA Channel
Short Pins 1-2
DACK1
Short Pins 2-3
DACK3
(Factory setting)
J4 Password LED Select
J4 is a three-pin berg that selects the Password LED.
The end user must enter the correct system password if the Password LED is blinking. If the password LED blinks,
the system has experienced no system activity during the length of time specified in Power Management Setup.
The AMIBIOS system password feature and AMIBIOS Power Management feature must be enabled before the
Password LED will blink when the correct system password must be entered by the end user.
J4 Pin Settings
LED selected
Short Pins 1-2
Front panel power LED is Password
LED.
(Factory setting)
.
Short Pins 2-3
Separate Password LED using P32
Summary of Contents for Excalibur PCI
