American Megatrends Atlas PCI-II, User Manual

Page: 55 / 93

Chapter 2 WINBIOS Setup 49
Advanced Setup,
Continued
Floppy Drive Swapping Set this opt ion to Enabled to permit drives
A: and B: to be swapped. The settings are Enabled
or Disabled . The Optimal and Fail-Safe default
settings are Disabled.
System Boot Up Sequence This option sets the sequence of boot
drives (either floppy drive A: or hard disk drive C:)
AMIBIOS attempts to boot from after AMIBIOS
POST completes. The settings are
C:,A: or A:,C:.
The Optimal default setting is C:,A:. The Fail-Safe
default setting is A:,C:.
Base Memory Set this option to the amount of base system
memory in the computer. The settings are
512KB or
640KB . The Optimal and Fail-Safe default settings
are 640KB.
Password Checking This option enables the password check option
every time the system boots or the end user runs
Setup. If
Always is chosen, a user password prompt
appears every time the computer is turned on. If
Setup is chosen, the password prompt appears if
WINBIOS is executed. See page 89 for instructions
on changing a password.
The Optimal and Power-On defaults are Setup.
Internal Cache Set this option to Enabled to enable L1 internal
cache memory. L1 cache memory is on the CPU. The
settings are
Enabled or Disabled. The Optimal
default setting is Enabled. The Fail-Safe default
setting is Disabled.
External Cache Set this option to Enabled to enable L2 secondary
(external) cache memory. The settings are Enabled
or Disabled. The Optimal default setting is Enabled.
The Fail-Safe default setting is Disabled.
Cont’d