American Megatrends Atlas PCI-II, User Manual

Page: 71 / 93

Chapter 2 WINBIOS Setup 65
Peripheral Setup,
Continued
Onboard Primary/Secondary Controllers The Peripheral Setup IDE
options that become available depends on the
onboard IDE controllers you enable:
Controller Peripheral Setup IDE Options
Only
Primary
Set Onboard Primary/Secondary IDE to
Primary. The following options become
available:
Onboard Primary LBA Mode,
Onboard Primary Block Mode,
Onboard Primary 32-Bit Transfer,
Onboard Primary Prefetch,
Onboard Primary Post Write
Onboard Primary Master PIO, and
Onboard Primary Slave PIO.
Primary
and
Secondary
(Both)
Set Onboard Primary/Secondary IDE to Both.
The Onboard Secondary Drives Present option
will be available if the secondary IDE controller
is used and the
Onboard Primary/Secondary
IDE option is set to Secondary or Both. Specify
the number of IDE drives attached to the
Secondary IDE controller.
The settings are
None, 1 Drive , or 2 Drives . The
default setting is None. If 1 Drive or 2 Drives is
selected, the following options become
available:
Onboard Primary LBA Mode,
Onboard Primary Block Mode,
Onboard Primary 32-Bit Transfer,
Onboard Primary Prefetch,
Onboard Primary Post Write
Onboard Primary Master PIO,
Onboard Primary Slave PIO.
Onboard Secondary Drives Present,
Onboard Secondary LBA Mode,
Onboard Secondary Block Mode,
Onboard Secondary 32-Bit Transfer,
Onboard Secondary Prefetch,
Onboard Secondary Master PIO, and
Onboard Secondary Slave PIO.