American Magnetics 430, Installation, Operation And Maintenance Instructions

Page: 121 / 254

R
EV
9 105
A
MERICAN
M
AGNETICS
, I
NC
. O
PERATION
: S
ETUP
S
UBMENU
D
ESCRIPTIONS
: N
ET
S
ETTINGS
S
UBMENU
S
YSTEM
N
AME
(P
RESENT
)
This submenu item displays the currently assigned system name
(also known as
host name
or
computer name
), the
name
by
which the Model 430 Programmer is identified on a network. This
setting can
only
be modified using remote communications
(either Ethernet or RS-232); it cannot be edited using the front
panel keypad.
IP A
DDRESS
(P
RESENT
)
This submenu item displays the currently assigned system IP
address for the Model 430 Programmer. The value in
parentheses after the IP address value indicates how the IP
address is assigned. DHCP indicates that the value is
dynamically assigned by a DHCP server; Static indicates that the
value is static, assigned by the Model 430 user. The default value
is 0.0.0.0. However, since the default method of IP address
assignment is by DHCP server, this value is typically set by the
network DHCP server.
S
UBNET
M
ASK
(P
RESENT
)
This submenu item displays the currently assigned subnet mask
for the Model 430 Programmer. The value in parentheses after
the subnet mask value indicates how the subnet mask is
assigned. DHCP indicates that the value is dynamically assigned
by a DHCP server; Static indicates that the value is static,
assigned by the Model 430 user. The default value is 0.0.0.0.
However, since the default method of subnet mask assignment is
by DHCP server, this value is typically set by the network DHCP
server.
+50.00 A — System Name (Present)
+0.50 Vs AMI
+50.00 A — IP Address (Present)
+0.50 Vs 0.0.0.0 (DHCP)
+50.00 A — Subnet Mask (Present)
+0.50 Vs 0.0.0.0 (DHCP)