Amcrest AMDV108116 User Manual Download Page 125

Page: 125 / 142

125

5.3.4 Alarm Interface

This is the interface for the DVR's Alarm management menu. There are 4 main sections. See the table below for

more information:

Number

Section

Parameter

Function

Alarm
Type

Video loss

The system triggers the alarm when video loss occurs.

Motion detection

The system triggers the alarm when motion detection
occurs.

Tampering

The system triggers the alarm when camera is maliciously
masked.

Disk full

The system triggers the alarm when the disk is full.

Disk error

The system triggers the alarm when a disk error occurs.

External alarm

An alarm input device triggers the alarm.

Operation

Prompt

The system automatically pops up an alarm icon on the
Alarm button in the main interface when there is an
alarm.

Alarm
Sound

Play alarm sound

The system sends out an alarm sound when an alarm
occurs. A custom sound can be used.

Sound path

Here you can specify the alarm sound file.

Alarm
Indicator

All

All triggered alarms are displayed here.

5.4 Web Access Settings Menu

The web access settings menu has slight differences with the DVR's menu. In this section, the web access settings

menu will be explained in depth just like the DVR settings menu had been explained in the sections above. For
more information about the DVR's Settings Menu, see section 4.10.

Summary of Contents for AMDV108116















































































































































Search results

Summary of Contents for AMDV108116

Reviews:

Brands by name

Popular brands

Amcrest AMDV108116, User Manual

Search results

Summary of Contents for AMDV108116

Reviews:

Brands by name

Popular brands