Version 1.1.1 dated February 25th, 2013
Page 72
Original operating instructions
MT50
GB
First after 3
months then
every
6 months
Sp
in
dl
e
ge
ar
Ve
rti
ca
l m
ill
in
g
Oil change
For oil change use an appropriate collecting tray of
sufficient capacity.
Have the spindle run for a few minutes the oil will heat up
and easily penetrate from the opening.
Unscrew the screw from the drain hole.
Fig. 8-6:
Drain hole vertical gear
Unscrew the screw from the filler hole.
Fig. 8-7:
Filler hole vertical gear
Close the drain hole if no more oil drains.
Fill up to the middle of the reference mark of the oil sight
glass into the filler hole using a suitable container.
Interval
Where?
What?
How?
Drain hole
Filler hole