Version 1.1.1 dated February 25th, 2013
Page 13
Original operating instructions
MT50
GB
INFORMATION
The table housing of the cross table included in the scope of delivery can be used as
chip and spray guard. The table housing does not possess any safety relevant
function. If required it is possible to disassemble the table housing.
1.8.1 Lockable main switch
WARNING!
Dangerous voltage even if the main switch is switched-off.
In the areas marked by pictogram in the margin, there might be voltage, even if the
main switch is switched-off.
In the position "0FF" the lockable main
switch can be secured against acciden-
tal or non-authorized switching-on by
means of a padlock.
When the main switch is switched-off,
the current supply is interrupted.
Fig. 1-1: Main switch
1.8.2 EMERGENCY-STOP push button
Turn the knob of the push button to the
right in order to be able to restart the
machine after having pressed the push
button.
Then switch off the main switch and
switch it on again.
Fig. 1-2: EMERGENCY-STOP push button
1.8.3 Milling table
Seats for T-slots are attached to the milling table.
WARNING!
Risk of injury due to parts flying off at hi
gh speed. Securely fix the workpiece on the
milling table.
Main switch
EMERGENCY-STOP
push button